Symbol Technologies MC70 - Manual (Page 70)

3 - 12 MC70 User Guide
Accepting a Bond
When a remote device wants to bond with the EDA, enter a PIN when requested to grant permission.
1. Ensure that the EDA is set to discoverable and connectable. See Bluetooth Settings on page 3-25.
When prompted to bond with the remote device the PIN Code Request window appears.
Figure 3-17 PIN Code Request Window
2. In the PIN Code: text box, enter the same PIN entered on the device requesting the bond. The PIN must
be between 1 and 16 characters.
3. In the Device Name: text box, edit the name of the device requesting the bond, if desired.
4. Tap OK to create the bond. The EDA can now exchange information with the other device.
Discovering Services
Before using services, first discover remote devices and then bond to those devices.
To determine what services are available on a bonded remote device:
1. Tap the Bluetooth icon and select Show BTExplorer.
2. In BTExplorer window, tap and hold on the remote device and select Explore from the pop-up menu.
Figure 3-18 Discovering Services