Symbol Technologies MC70 - Manual (Page 94)

4 - 4 MC70 User Guide
Incoming Call Features
• If you receive a call while in a call, tap Wait to place the call in call waiting.
• You can use other programs on the EDA during a call. To switch back to Phone, tap Talk or tap Start -
Phone. Tap End to end the call.
• If a caller isn't in your contact list, create a contact during the call or from Call History by tapping Menu -
Save to Contacts.
• To terminate a call when a second call comes in and answer the waiting call, tap End on the Phone
keypad to disconnect the active call, then tap Answer or press the Send key to answer the waiting call.
• To hold the current call and answer a waiting call, tap Answer or press the Send key to place the current
call on hold and answer the incoming call.
• To put a call on hold to call another number or answer an incoming call, tap Hold. To move from one call
to another, tap Swap.
Muting a Call
During a call, you can mute the microphone so you can hear the person on the line but he or she cannot hear
conversation from the microphone. This is useful when there is conversation or background noise on your end.
To mute or unmute a call:
1. Tap Start - Phone or press the green phone key on the EDA’s keypad.
2. Tap Mute on the display to mute audio. The Mute icon appears.
Figure 4-5 Mute Button and Icon
Mute Icon