Symbol Technologies MC70 - Manual (Page 91)

Chapter 4 Using the MC7004/MC7094 Phone
Chapter 4
Using the MC7004/MC7094 Phone
Introduction
Use the MC7004 and MC7094 phone to make phone calls, set up speed dials, keep track of calls, and send
text messages. Your wireless service provider may also provide other services such as voice mail, call
forwarding, and caller ID.
Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read
e-mail. Connect to the Internet or work network over GPRS using Cellular Line, or using the modem specified
by the mobile operator. For more information, or to customize the EDA phone by changing phone settings, see
the MC70 Integrator Guide.
Accessing the Phone Keypad
Access the keypad regardless of the program in use. Applications on the EDA can be in use during a call.
Figure 4-1 Phone Keypads
To access the phone keypad tap Start - Phone or press the green phone key on the EDA’s keypad.
Antenna/Signal
NOTE
Keypads vary depending on services and the state of the phone. For example, place calls on
hold and use Swap to switch active calls on hold. (See Three-way or Conference Calling on page
4-14 .)