Symbol Technologies MC70 - Manual (Page 62)

3 - 4 MC70 User Guide
Warm Boot
Performing a warm boot on the EDA returns Bluetooth to the last state after initialization.
Suspend
Suspending the EDA turns off Bluetooth.
Resume
When the EDA resumes, Bluetooth turns on if it was on prior to suspend.
Modes
The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer
Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth
users. To switch between modes, select View - Wizard Mode or View - Explorer Mode.
Wizard Mode
Wizard Mode provides a simple process for discovering and connecting to Bluetooth devices.
The following steps provide an example for using the Wizard to connect to remote devices.
1. Tap the Bluetooth icon and select Show BTExplorer. The BTExplorer window appears.
2. Tap File - New Connection. The New Connection Wizard window appears.
Figure 3-3 New Connection Wizard Window
NOTE
Suspending the EDA powers off the Bluetooth radio and drops the piconet (Bluetooth
connection). When the EDA resumes, it take approximately 10 seconds for the Bluetooth radio
driver to re-initialize the radio.
NOTE
Switching between Wizard Mode and Explorer Mode closes all active connections.