SMC Networks Air Weigh AW5800 - Manual (Page 10)

10
Glue Install
– alternative to welding
Mark the center of the axle and prepare it for glue.
Apply glue to the bottom of the bracket assembly.
Mount bracket assembly on the axle with band clamps.
Tighten the band clamps and let the glue cure.
Apply epoxy paint to glue and axle seam, let dry.
Mount the sensor and mounting tab to the brackets.
Connect the cables and mount to the tab.
Route the extension cable through the firewall.
Check for sensor readings in range.
Mount the cover over the sensor and brackets.
GLUE INSTALLATION OVERVIEW DRAWINGS