SMC Networks Air Weigh AW5800 - Manual (Page 16)

16
Figure 4
5. Clean the underside of the bracket assembly (111-0001-
000) with (1) of the supplied alcohol pads (Figure 4).
Ensure that the bracket assembly bolts are only loosely
fastened to the nuts, so that the alignment tool (110-0073-
000) has a slight amount of free play. Leave the foam strip
on the bottom attached to the bracket assembly.
6. Adhesive application. The working time of the glue at
73°F is about 10 minutes.
7. Assemble the Glue Kit (010-0069-00X) using the
Adhesive Application Kit (010-0021-00X) and the supplied
duo-pak glue cartridge (350-0038-XXX) as per page 13.
Note:
See Appendix A page 30 if using Teromix-6700
adhesive.