Silicon Optix 50HD - Manual (Page 20)

Chapter 2 – Connections
11
C
ONNECTIONS
Wired Remote Control
The wired remote control jack enables you to connect the remote control to the pro-
jector using the included cable. When using the wire remote control feature, you do
not have to be in the line of sight of the IR sensors to operate the projector. Also, the
remote control is powered by the projector which saves battery power.
+12VDC Outlet
The +12VDC Outlet jack enables you to trigger an external device when the projec-
tor power is turned on. The maximum output current is 200mA. Please use an adap-
tor plug with "+" polarity 2.5 mm inside diameter and "-" polarity 5.5 mm outside
diameter and cable length as needed.
Connect the
remote control
to this jack using
the included
remote control
cable.