Silicon Optix 50HD - Manual (Page 28)

Chapter 4 – OSD Menus
19
OSD M
EN
US
Input Signals
The Input Signals menu lets you specify
the signal type for the input into your pro-
jector. The following input signal types are
available.
Component 1&2 YPbPr
Select a YPbPr, SDTV, or HDTV compo-
nent input source.
Component 1&2 RGB
Select an RGB, RGBH+V, or RGBHV
input source.
PC
Use this option to select the computer input.
DVI
Use this option to select the DVI input.
Composite
Use this option to select the Composite Video input source.
S-Video
Use this option to select the S-Video input.
Picture (Video Only)
The Picture menu lets you adjust the following
options for your image.
Brightness
Use this option to adjust the overall brightness
of your image. Use this control in conjunction
with contrast to fine-tune the display. The scale
is from 0 to 100. The default setting is 50.
Contrast
Use this option to adjust the contrast of your image. Use this control in conjunction
with brightness to fine-tune the display. The scale is from 0 to 100. The default set-
ting is 50.
Sharpness
Use this option to adjust the clarity and focus of the image. This item is available for
both video and graphic sources. The scale is from 0 to 11. The default setting is 9.