Silicon Optix 50HD - Manual (Page 44)

G
AMMA
M
ANAGER
Appendix C
The Gamma Manager Utility
About the Gamma Manager Utility
Gamma Manager may be an optional item for your projector, please check with your
sales agent.
The Gamma Manager Utility enables you to send user-defined gamma correction
values to the projector from your PC. Gamma correction provides more precise con-
trol over the brightness, contrast, and color.
This software operates under the Microsoft Windows XP/Me/2000/98SE/98/NT oper-
ating systems. This manual references only these Microsoft Windows Operating
Systems. Refer to the Microsoft Windows operation manual for details.
Required Hardware and Software
Gamma Manager requires the following hardware and software for operation.
• PC running under Microsoft Windows XP/Me/2000/98SE/98/NT
• 233 MHz Pentium CPU or higher is recommended
• 800 x 600 display capable of displaying 65,536 colors or more
• At least 32 MB of memory
• At least 10 MB hard disk free space
• RS-232C serial port
• CD-ROM drive to install the software
Note: This software may not operate normally if the computer configura-
tion and serial port settings are not set correctly or other serial devices
are connected to the computer.