Silicon Optix 50HD - Manual (Page 27)

OSD M
ENUS
Chapter 4
OSD Menus
About the OSD Menus
You can configure the Premiere 50HD DLP Projector by using the On Screen Dis-
play (OSD) Menus. The OSD menus enable you to set advanced features of the pro-
jector, including setting the input signal type, brightness, contrast, sharpness, color
tint, and display language, among other things.
To access the OSD Menus, press the OSD Menu button on your remote control unit
or the control panel. You can navigate through the OSD Menus by using the Up,
Down, Right and Left buttons. Currently selected items are highlighted in yellow.
There is an OSD Background menu that enables you to change the OSD Menu color
scheme.
Configuration settings are saved automatically when selected on the screen.
Main Menu
The Main Menu allows you to access the various submenus as shown below.
The following sections cover each submenu in the Main Menu:
Input Signals
‡
page 19
Picture
‡
page 19
Advanced
‡
page 22
Geometry
‡
page 26
Aspect Ratio
‡
page 27
Language
‡
page 28
Factory Default
‡
page 28