Sony RM-AV3100 - Manual (Page 20)

20
Using Non-Preset
Remote Control
Operations
— Learning Function
To operate non-preset components or
functions, use the following “learning”
procedure to “teach” any of the
programmable buttons and keys to
operate the functions of another remote
control. You can also use the learning
function to change the signal of
individual keys and buttons after setting
the component code number (page 12).
To “teach” to the Component Select
buttons or Label keys, see page 46.
To “teach” to the SYSTEM CONTROL
buttons or Label keys, see page 50.
Notes
• Some specific remote control signals may not
be learned.
• The learned function may not work properly
if a target component's remote control preset
button has two different functions for a single
press. If this occurs, teach the two signals for
a Label key by referring to “Learning up to 4
signals to one key” on page 53.
MENU EXIT
COMMANDER
OFF
MORE 3 2 1
TV STB VCR DVD CD AMP OTHER
TIMER LIGHT
MUTING RECALL
CHANNEL VOLUME
SYSTEM CONTROL
OK
3
4
5
2
8
Input select for AMP (2):
“S.FIELD”
: VIDEO1
“GENRE” : VIDEO2
“MODE” : VIDEO3
“CENTER –” : TV
“CENTER +” : MD
“REAR –”
: CD
“REAR +” : TAPE
“– SUB” : PHONO
“ CD.INPUT” : AUX
“D.INPUT” : TUNER
This setting can be used for
programming the SYSTEM CONTROL
buttons (page 32).
Operating Your Components with
the Remote Commander
(continued)