Sony RM-AV3100 - Manual (Page 63)

63
4
Select the component by pressing
the Component Select button or
the Label key.
TV
The selected component name
appears on the Mode Display key.
The macro keys flash. To change the
Label keys, press the Mode Display
key (in this case, TV).
If you select the component name
for which the Key Macro function
cannot be programmed
“NG” flashes twice and “NG” sound is
heard.
5
Select the macro key by pressing
the Label key.
VIDEO4
The selected label lights on the Label
key. And other keys flash.
If you press the Label key for
which the Key Macro function
cannot be programmed
“NG” flashes twice and “NG” sound is
heard.
To change the name of the macro
key
Keep the macro key pressed for more than
2 seconds, and follow Steps 2 - 5, page 25.
6
Press the keys for the operation in
order (1
t 2 t 3 t ENTER).
Note
If you enter more than four keys, the last
four keys are programmed for the macro
key.
Tip
You can also program other component
functions for the same macro key. After
pressing the Component Select button or
OTHER button, press a Label key you want
to program.
7
Press the macro key (in this case,
VIDEO 4).
“1,” “2,” “3,” and “ENTER” appear
twice.
8
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
Continued