Sony RM-AV3100 - Manual (Page 50)

50
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons or
Label Keys
In addition to their original System
Control functions (see page 32), SYSTEM
CONTROL 1, 2 or 3 buttons or SYSTEM
4 - 15 Label keys can be programmed to
“learn” any remote control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1, 2
or 3 buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
MENU EXIT
COMMANDER
OFF
MORE 3 2 1
TV STB VCR DVD CD AMP OTHER
TIMER LIGHT
MUTING RECALL
CHANNEL VOLUME
SYSTEM CONTROL
OK
4
6
2
3
“COPY” appears on the Mode
Display key.
In this case, “DVD c c VCR” flashes
on the Label keys and moving finishes
with a beep sound. And the keys for
VCR appears.
6
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
To return to the original setting
Follow steps in “To clear all signals
learned for a specific component,” page
27.
Assigning Other Components to
the Component Select Buttons or
the Label Keys (continued)