Sony RM-AV3100 - Manual (Page 59)

59
5
Press the “ENTER” key.
During transferring the data,
“
c c c c” flashes.
When the data has been successfully
transferred, “END” appears on the
right Label key.
Note
If “NG” appears while sending the data, go
back to Step 6 and continue the operation
or press COMMANDER OFF to stop the
operation.
6
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
Notes
• The data of the System Control function
programmed for a Component Select button
cannot be transferred.
• Be sure that the receiving Commander is
ready to receive data.
Receiving the data
This Commander can receive the data of
another Sony RM-AV3100.
To receive all the data from
another remote commander
1
Follow Steps 1 to 5 on page 54.
2
Press the x key.
X : Transfer data
x : Receive data
3
Press the ALL key.
ALL
ALL: All data of the Commander
COMPO: Data of a Component
Select button or a Label key
Continued