SATO DR300 User Manual
Page 18
Advertising
DR300 Operator Manual
16
• Insert Carbon Ribbon fully into the Ribbon Unwinder Unit. (Caution on
direction of unwinding)
• Set Ribbon Core on Ribbon Rewinding Unit.
• Pass Carbon Ribbon from Ribbon Unwinder Unit to Ribbon Rewinding Unit
underneath the thermal print head. Fix Carbon Ribbon Core with tape, etc.
and wind several times in the direction of the arrow. Confirm carbon ribbon
is set as the drawing on the left side by viewing from its side.
Chapter 4 - Setting Label and Carbon Ribbon
Advertising