SATO DR300 - Manual (Page 39)

DR300 Operator Manual
37
[3] User Mode
Setting of print darkness, speed, offset adjustment can be done in this mode. To enter
this mode, power on printer while holding down <LINE> key.
Press <LINE> while power on printer, buzzer sounds and
press <FEED> key to proceed to next setting.
<LINE> key : cursor movement
<FEED key> : confirm darkness selection
<LINE>
key : cursor movement
<FEED> key : confirm speed selection
<LINE> key : + or - sign selection
<FEED> key : confirm sign selection
<LINE>
key : increment offset value
<FEED> key : confirm vertical offset selection
<LINE> key : + or - sign selection
<FEED> key : confirm sign selection
<LINE>
key : increment offset value
<FEED> key : confirm horizontal offset selection
* Display returns to Darkness selection.
Set
Value 1 2 3
DR300 75mm/s 100 mm/s 125mm/s
USER
MODE
DARKNESS
L 1 2 3 4 5 D
SPEED
1 2 3
V. OFFSET
V : + 0 0 0 0
V. OFFSET
V : ± 0 0 0 0
H. OFFSET
H : ± 0 0 0
H. OFFSET
H : ± 0 0 0
DARKNESS
L 1 2 3 4 5 D
FEED key
FEED key
FEED key
FEED key
FEED key
FEED key
FEED key
Chapter 8 - Operation Panel