SATO DR300 - Manual (Page 87)

DR300 Operator Manual
85
APPENDIX A
Basic Specification
DR 300 General Specifications
Head Density
8 dots/mm
Print Method Thermal Transfer/Direct Thermal
CPU 32-bit RISC CPU
Print Speed 75, 100, 125 mm/second (Selectable)
UPC-A/E EAN-8
EAN-13 NW7
Code 39 ITF2/5 Code 128 UCC/EAN128
Bookland
Bar Code Type
2D: PDF417, Data Matrix, Vericode, QR code, Maxicode3
*2D barcode: online printing only
Bar Code Ratio 1:2, 1:3, 2:5 (Software defined)
Font
Expansion
1-9 times (Both horizontally and vertically)
Font Type U – Font** W5xP9 (Alphanumeric, notation)
S – Font** W17xP17 (Alphanumeric, notation)
M – Font** W24xP24 (Alphanumeric, notation)
OCR – A Font W19xP22 (Alphanumeric, notation)
OCR – B Font W20xP24 (Alphanumeric, notation)
WB – Font W48xP48 (Alphanumeric, notation)
WL – Font W48xP48 (Alphanumeric, notation)
**IBM 850 Code Set Table
Print Area Max W 80 mm x P 178 mm
Label Size Width 32 – 80 mm Pitch 19 – 181 mm
(Label size is inclusive of label web)
Label
Thickness 0.1 – 0.26 mm
Operation
Panel Key: LINE Key, FEED Key
LCD: 8 digits x 2 lines (English character display, Black Lit)
(only applicable to On-line use)
STATUS: 2 – colour LED (Red, Green)
Adjustment
VR PRINT : Print Darkness
PITCH : Print Pitch
OFFSET : Print Offset
User Mode 1. Print Darkness
2. Print Position Adjustment
3. Print Speed
4. Offset Adjustment
Appendix A