SATO DR300 - Manual (Page 40)

DR300 Operator Manual
38
[4] Perform Test Printing
To enter this mode, power on printer while holding down <FEED> key.
“S” selection for this small label size paper.
Head check pattern is printed in designated paper width (4-8cm).
[5] “L” Selection for Large Label Size Paper
Head pattern and printer information will be printed.
Press <FEED> while power on printer, buzzer sounds and press <LINE> key to change
to “L”, then press <FEED> key to confirm selection.
Start test printing by pressing <FEED> key.
FEED key
TEST PRN
S L
TEST PRN
PRINTING
TEST PRINT
S
L
PR. WIDTH
04 CM
TEST PRN
PRINTING
FEED Key
FEED Key
LINE Key
Chapter 8 - Operation Panel