SATO DR300 User Manual
Page 56
DR300 Operator Manual
54
8) Graphic data transmission
Transmit graphics data directly to graphic field.
*1: When transmitting graphic data to printer, sequential numbering function of printer
cannot be utilized.
*2: Graphic can be stores in PC card using <D> command to indicate the register number
(3 digits). Stored graphic can be retrieved.
*3: Each graphic size must not exceed 26 kilobytes.
<GM> [1Bh, 47h, 4Dh] NN DDDDD, nnn……
E
Field
Graphic
Separator
BMP data
S D
C
N N D D D D D
,
9) Data ID transmission
This command registers ID information in status-3 communication mode. If omitted
when transmitting, the returned status will be blank.
<ID> [1Bh, 49h, 44 h] NN
E
ID
NO.
S ID
C
N N
Chapter 9 - Online Programming