SATO DR300 - Manual (Page 42)

DR300 Operator Manual
40
Tctr Timk Tsde Lgap
Limk
Setting
pitch adjustment
<LINE> key : proceed to cut
adjustment setting
<FEED> key : selection of sensor
and label types
**
Pitch adjustment value can be
incremented by pressing <LINE>
key and confirm by pressing
<FEED> key.
** All value is on 0.1V unit step.
Setting
cut adjustment
<LINE> key : proceed to backfeed
adjustment setting
<FEED> key : selection of sensor
and label types
Tctr [0.0v]
TH [0.0v]
PITCH ADJ
FEED key
FEED key
PITCH A D J
Tctr +00
PITCH A D J
Tctr +00
PITCH A D J
Tctr +00
CUT ADJ
FEED key
FEED key
FEED key
FEED key
LINE key
LINE key
CUT ADJ
Tctr +00
CUT ADJ
Tctr +00
FEED key
FEED key
Chapter 8 - Operation Panel