SATO DR300 - Manual (Page 67)

DR300 Operator Manual
65
VeriCode
Digit
Position
Designated Item Designated Description
1 Field Designation 4 : 2D Bar Code
2 Field Designation 2 : VeriCode
3 Mode 0 : [0] Fixed
4, 5
6, 7 Vertical Position 0000 : Input only and no printing field
0001 ~ 2848 : Vertical position (dot)
8, 9
10 Horizontal Position 001 ~ 640 : Horizontal position (dot)
11 Rotation 0 : 0º
1 : 90º
2 : 180º
3 : 270º
12, 13 Module Vertical Dot Count 03 ~ 10 : Cell Size (dot)
(refer to module size notes)
14, 15 Reserved [0 0] Fixed
16 Error Correction 2, 4 : Error Correction Level
17, 18 Matrix Size 01 ~ 20 : Matrix Size (input data count)
19 ~ Reserved All [0]
* Module
Define the cell size:
1. The definitions of 01, 02 are acceptable but may be difficult to read/decode.
2. Use larger module for better printing quality.
Error Correction and Data
Maximum data count depends in the definition of error correction and matrix size.
1. Error Correction Level
Error Correction Level and User Data Ratio/Correction capabilities relations table:
Correction Level User Data Ratio Correction Capability (%)
2 75% 12.5%
4 50% 25.0%
Chapter 9 - Online Programming