Siemens HiPath 4000 - Manual (Page 12)

Setting Up the Telephone Installing the Telephone
12
Setting Up the Telephone
This chapter describes how to connect the individual elements of the
optiPoint 410/420 with each other (
Æ Installing the Telephone) and how to
set up the device ready for operation ( Æ Preparing for Operation).
Installing the Telephone
Connectors on the bottom of the telephone
entry economy standard advance
1 Ethernet port for LAN connection (optional with PoL
[1]
)
[1] Power over LAN:
If power is supplied over the LAN cable, no local power supply is required.
2 Handset connector
3 Connector for a local power supply unit (optional
[1]
)
4 - - Module connector
5 - - Ethernet port for PC
6 - - Headset connector
7 - - Adapter 1
8 - - Adapter 2 -
9 - - - USB-Master
2
1
3
1 2
3 6
4
5
7 8
optiPoint 410 entry optiPoint 410/420 standard
9