Siemens HiPath 4000 - Manual (Page 76)

Alphabetical Reference Description of functions
76
Report Mode
• Choose the according Report Mode:
– 1: A report will be sent at the end of a session when the threshold
was reached.
– 2: A report will be sent within each Æ Report Interval when the
threshold was reached.
– 3: A report allways will be sent at the end of a session.
– 4: A report allways will be sent within each
Æ Report Interval.
Æ page 54
Restart Terminal
• Executes the restart of the optiPoint 410/420.
Æ page 46
ROM Test
• You can test the Æ ROM memory of your optiPoint 410/420.
• The results are displayed after the test is over.
Æ page 26 Æ page 49
RTP Port Base
• Use: Transfer of voice packets at Æ VoIP.
• Enter the Æ Port-Number for transfer of the Æ RTP Port Base.
Æ page 56
Service Agent
• Different PC applications contact the telephone via the Service Agent
interface. The interface is used to determine which ports are utilized for
further communication by these applications. Services dependent on
an interface cannot be accessed if the interface is deactivated.
• The following ports can only be activated if the service agent is activat-
ed:
– Probe Interface: This port is required for error searches in customer
systems (test interface). It allows external feedback suggestions
from messages to be entered in telephones thus enabling different
scenarios to be tested.
– Test Interface: This function permits automatic regression tests. Key-
strokes can be simulated and displays or audio statuses can be read
out.
– CTI: This function provides classic dialing assistance (for example, via
Windows dialing aid application).
– Resource Sharing: The PC mouse and keys can be used to control
telephone applications (for example, DSM).
Æ page 56