Siemens HiPath 4000 User Manual
Page 62
Alphabetical Reference
Description of functions
62
Default Route
•
Enter the
Æ IP address that was assigned to your Æ PBX if no
Æ DHCP server assigns this value dynamically.
•
If the value was assigned dynamically, it can only be read.
•
A restart is necessary after the change.
•
Standard value
•
IP editor in the optiPoint 410/420
Default SNTP IP
•
This entry is only required if you selected "SNTP" in the
field.
•
Enter the
Æ IP address of the Æ SNTP server.
Default VLAN ID
•
Can be defined only if the
Æ Layer 2 support is activated Æ QoS L2/L3.
•
Enter a value from 0 to 4095 here. This value describes the association
with a certain VLAN, if a
Æ VLAN is used.
DHCP
•
Activate this option if the required IP data of the telephone should be
assigned dynamically by a
Æ DHCP server.
•
If no DHCP server is available in the IP network, please deactivate this
option. In this case, the data corresponding to the
Æ Terminal Mask and Æ Default Route must be defined manu-
ally.
•
A restart is necessary after the change.
•
Standard value
Display Test
•
Conduct this test to check the function of the
Æ LCD display in the Dis-
play telephone.
•
Different display contents are displayed with the
<
and
>
keys.
DLS Server Port
•
Enter the
Æ Port-Number for communication with the Æ DLS-Server .
DLS Server Address
•
Enter the
Æ IP address of the Æ DLS-Server.