Siemens HiPath 4000 - Manual (Page 97)

Standard value Factory Default Settings
97
Local Country Code
[2]
44
Lost packet thresholds 10
Max jitter threshold 15
Minimal Session Length 255
Mobility On
National Dial Prefix
[2]
0
Observation Interval 10
Packet Size Auto
QCU home address 0.0.0.0
QoS L2/L3 On
QoS Layer 2 Default 0
QoS Layer 2 Voice/Signalling 5
QoS Layer 3 Signalling 26
QoS Layer 3 Voice 46
Report Interval 10
SNMP password
Æ Password Functions public
SNMP trap ID address 0.0.0.0
SNTP IP address 0.0.0.0
Switch To Home Expiry Timeout 20
Switch To Home Retry Count 3
Switch To Standby Expiry Timeout 20
Switch To Standby Retry Count 3
TC_TEST Expiry Timeout 20
TC_TEST Retry Count 3
Terminal IP address 0.0.0.0
Terminal mask 0.0.0.0
Time zone offset +0
VLAN DHCP
VLAN ID 0
WAP mode
[2]
HTTP
WAP server address
[2]
0.0.0.0
WAP server port [2] 9200
[1] Filename is postfixed by a letter a, b, c or d for the various language packages.
[2] optiPoint 410 standard/advance, optiPoint 420 advance only
Function standard value