Restart, Step by step – Siemens HiPath 4000 User Manual
Page 29
Advertising
optiPoint 410/420 economy/economy plus/standard/advance
Administration
29
Step by Step
Restart
Web-based Management Tool
Reset via the Web-based Management Tool
Æ page 42.
1. Open the Dialog „Restart Terminal“
.
Menu: Administrator Actions > Restart Terminal
2. Click on the button „Restart“
.
By pulling the power plug
Disconnect the red Western plug of the power supply
unit cable (Pos. 3
Æ page 12) or, if "Power over LAN",
disconnect the LAN cable (Pos. 1
Æ page 12) from the
optiPoint 410/420 for a few seconds.
Then reconnect the plug.
After restart
On normal restart the following displays come in se-
quence:
Basic display after finished restart.
Warning: Restarting
User request
NETBOOT - 1.10
optiPoint 410
4:28PM
16.07.03
1228
>
Advertising