Siemens HiPath 4000 - Manual (Page 18)

Step by Step
Setting Up the Telephone Preparing for Operation
18
Other settings
All other settings of your optiPoint 410 entry must be
made through the "Web-based Management Tool"
Æ page 42.
Open the "System" page in your browser and enter the
following parameters:
•
PBX address Æ page 65
• Participant No. Æ page 79
• Participant password Æ page 79
• System type Æ page 79
Confirm your entries and start the telephone:
Press key.
mm
Enter the code.
r
Confirm the entry.
After the start, the telephone is silent and you can make
the other settings
Æ page 32.
Error handling
If the optiPoint 410 entry does not function after making
the described configuration, the failure can be attribut-
ed to peculiarities of the network environment.
More information on error detection is available in the
"Start up not successful"
Æ page 91.