Siemens HiPath 4000 - Manual (Page 81)

Description of functions Alphabetical Reference
81
VLAN Method
• Can be defined only if the Æ Layer 2 support is activated (Æ QoS L2/
L3).
• Here you must define the location from where the Æ Default VLAN ID
should be fetched, if Æ VLAN is used.
Æ page 22 Æ page 17 Æ page 52
VoIP Encryption Settings
• Only for optiPoint 410/420 economy plus/standard/advance.
• This field shows whether Æ VoIP Security is activated (current) for your
telephone, how long it has been activated, and when the next Æ PSS
key update (future) is scheduled.
• These settings are made in the Deployment Tool.
Æ page 57
WAP Connection Type
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Choose the protocol over which the data transfer should take place for
WAP applications:
Æ HTTP or Æ WSP.
Æ page 48
WAP Favourites
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Choose the designated Æ WAP Favourite from the list. Are no entries
available <empty> will be displayed. Entering Favourites see Æ WAP
Title.
Æ page 48
WAP Password
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Enter the password for the WAP gateway access.
Æ page 48
WAP Username
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Enter the user name for the WAP gateway access.
Æ page 48
Manual The ID entered in Æ Default VLAN ID is used.
DHCP If a Æ DHCP server is used, then the ID delivered by
this server is applied.