Sennheiser EM500 - Manual (Page 11)

Product overview
10
Overview of the displays
After switch-on, the receiver displays the standard display “ Receiver
Parameters ”. For further illustrations and examples of the different
standard displays, please refer to page 25. This standard display displays
the operating states of the receiver and provides the most important
information on the received transmitter – provided the transmitter
supports this function.
542.625
SKM500
B.CH: 20.30
MUTE
EQ
+ 12dB
MHz
ew500 G3
P
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
ብ ቦ
ቧ ቨ ቩ ቪ ቫ ቭ ቮ
ቢ ባ ቤ
Display
Transmitter/
receiver
Meaning
ቢ
RF level “ RF ”
(Radio Frequency)
Receiver
ባ
Audio level “ AF ”
(Audio Frequency,
see page 37)
Transmitter
ቤ
Frequency bank and
channel (see page 36) Receiver Current frequency bank and channel number
40
30
20
10
RF
Diversity display:
Antenna input I is active
Antenna input II is active
RF signal level:
Field strength of the received signal
Squelch threshold level
PEAK
-10
0
-20
-40
AF
-30
Modulation of the transmitter
with peak hold function
When the display for audio level
shows full deflection, the audio level
is excessively high. When the trans-
mitter is overmodulated frequently
or for extended periods of time, the
“
PEAK ” display is shown inverted.