Sennheiser EM500 - Manual (Page 45)

Adjustment tips and functions
44
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency banks “
U1 ” to
“ U6 ” remain unchanged. For an overview of the factory-preset default
settings, refer to the supplied frequency information sheet.
Adjusting the network configuration
You can either automatically allocate or manually enter an IP address.
This menu item also shows the receiver’s unique and unchangeable MAC
address.
In order to ensure safe communication between receivers in multi-channel
systems (see page 46), we recommend using automatic allocation of IP
addresses.
Displaying the software revision
You can display the current software revision of the receiver.
̈
For information on software updates, visit the EM 500 G3 product page
on our website at www.sennheiser.com.
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Call up “Reset”
Advanced Menu
LCD Contrast
Reset
IP-Address
Select the
desired setting
Reset
Tune
No
Hotsync
Store the setting
Reset
Tune
Yes
Hotsync
“Stored”
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Select the mode and
confirm
IP-Address
Manual
192.168.178.100
MAC: 00-11-D8-B0-F4-33
Call up “IP-Address” Enter the IP address;
store the setting
Manual
192.168.178.100
IP-Address Advanced Menu
Factory Reset
IP-Address
Software Revision
“Stored”
192.168.178.100
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
MAC: 00-11-D8-B0-F4-33
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit