Sennheiser EM500 - Manual (Page 42)

Adjustment tips and functions
41
“Sync Settings”
Via the “ SK Settings ” and “ SKM Settings ” menu items, you can set the
transmitter parameters directly on the receiver and activate or deactivate
the transfer of these parameters to the transmitter:
By pressing the button
»
, you can transfer the parameters to the
transmitters via the infra-red interface (see page 22).
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Setting Transfer is...
... activated
... deactivated
Display Function
Settings/
adjustment range
Sensitivity Adjusts the input sensitivity:
SKM –48 dB to 0 dB,
adjustable in steps of
6 dB
SK –60 dB to 0 dB,
adjustable in steps of
3 dB
Auto Lock Activates/deactivates the lock
mode “ Inactive ”, “ Active ”
RF Power Adjusts the transmission power “ Standard ”, “ Low ”
Mute Mode Sets the mode for the MUTE switch
(SK only)
“ Disabled ”,
“ RF On/Off ”,
“ AF On/Off ”
Sensitivity
-69 dB
Sync
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
Sensitivity
-69 dB
Sync
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30