Sennheiser EM500 - Manual (Page 41)

Adjustment tips and functions
40
Setting a frequency
bank and a channel
and assigning this
channel a receiving
frequency
̈
Set the desired frequency bank.
̈
Set the desired channel.
̈
Set the desired frequency.
Changing the settings of the guitar tuner
The following settings are available:
̈ Turn the jog dial until the “ Tune ” menu item appears.
̈
Press the jog dial and keep it pressed until the frequency bank
selection appears.
̈ Press the jog dial.
The channel selection appears.
̈
Press the jog dial.
The frequency selection appears.
̈
Press the jog dial.
Your settings are stored.
You are back to the operating menu.
Set the frequency
bank and the channel
Tune
542.625 MHz
Set the frequency; store
the setting
Tune
Call up “Tune”
(special function)
Advanced Menu
542.625 MHz
Exit
Tune
Sync Settings
“Stored”
B.Ch: U1 . 1 B.Ch: U1. 1
542 .625 MHz
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Setting Meaning
“ Inactive “ The “ Guitar Tuner ” standard display is deactivated
(see page 25).
“ Active “ When selecting the “ Guitar Tuner ” standard display
(see page 25), the receiver is not muted.
“ Audio Mute “ When selecting the “ Guitar Tuner ” standard display
(see page 25), the receiver is muted.