Sennheiser EM500 - Manual (Page 32)

Adjustment tips and functions
31
Adjustment tips and functions
The operating menu allows you to make settings for your receiver and your
transmitters. The “
Guitar Tuner ” and “ Soundcheck ” standard displays
provide additional functions and can be call up by turning the jog dial,
without having to get into the operating menu.
Standard displays with additional functions
Tuning a guitar (SK transmitters only)
̈
Activate the “ Guitar Tuner ” standard display via the operating menu
(see page 40).
̈
Connect a guitar to your SK transmitter.
̈
On the receiver, change to the “ Guitar Tuner ” standard display (see
page 25).
̈
Tune your guitar.
The receiver automatically recognizes the pitch of the plucked string.
For more information on the “ Guitar Tuner ” menu item, refer to
page 40.
Doing a soundcheck
By doing a soundcheck, you can check the reception area for field strength
gaps (“dropouts”) which cannot be compensated for by the receiver’s
diversity circuitry.
̈
If necessary, change from the “ Soundcheck ” standard display to one of
the other standard displays of your receiver.
The “ Soundcheck ” standard display must not be activated until
later because otherwise the recording will give wrong results.
30
25
20
-40
“Guitar Tuner”
standard display “Receiver Parameters”
standard display
440 Hz
542.625 MHz
+ 12dB P
542.625
ew500 G3 ew500 G3 B.CH: 20.30
EQ
+ 12dB
MHz
SKM500
P
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30