Seiko Group OFL-12 SERIES - Manual (Page 10)

1 - 1
CHAPTER 1
USER NOTES
In this chapter, important notes for users are given. Please read them carefully
before using the OFL-12.
1.1 PRECAUTIONS FOR USING THE OFL-12
To protect the OFL-12 and use it correctly, please pay attention to the following
notes:


Do not leave the OFL-12 outdoors, or where water might damage it.


Do not subject the OFL-12 to undue vibrations or reckless drops.


Do not touch the operation panel or the switches with wet hands.


The OFL-12 is heavy (about 25 kg (55 lbs)), so place it on a sturdy table.


Be sure to supply electric power at the voltage and frequency specified.


Be sure to connect the grounding pin of the power cord plug to ground to
prevent electric shock.


Do not touch the rotating parts during use.


Be sure to disconnect the OFL-12 from the power source before changing the
polishing disks or other parts.
1.2 PREPARATION
In addition to the main Mass Production Polisher and its accessories, please
prepare the following items:


Cleaning paper lint-free synthetic cleaning tissue

Ethyl alcohol

Water Tap water

Washing container 3 (one for each polishing unit), approximately 3


(0.75
gal) each.(for washing the ferrules and holding jig)