Seiko Group OFL-12 SERIES - Manual (Page 21)

3 - 2
Air
Air
Polishing disk
Rubber disk
Polishing film
Colored label
3.2 POLISHING FILM PREPARATION
Step 1 Clean the rubber surface of the
polishing disk using cleaning
paper and ethyl alcohol. Be
sure to remove all dirt and
other foreign matter.
Step 2 Place the polishing film on the
polishing disk so it is centered.
With your hand, spread the
polishing film from the center
outward to squeeze out the air.
NOTE
Polishing film for Grinding: Green label
Polishing film for Polishing: Yellow label
Polishing film for Finishing: White label