Seiko Group OFL-12 SERIES - Manual (Page 4)

- iii -
PREFACE
This manual has been prepared to provide the information necessary to allow the
user to operate the OFL-12 Mass Production Polisher (hereafter referred to as OFL-
12) correctly and fully utilize its functions. Before using the OFL-12, be sure to read
this instruction manual thoroughly. Store the manual in a safe place for future
reference.
NOTE
The OFL-12 can only polish ferrules which meet the following conditions:


Ferrule material Zirconia (ZrO
2
)


Ferrule diameter 2.5 mm (0.0984 inch)
The OFL-12 can polish ferrules after assembly only with ST-type
connectors. Please contact SII for options if you wish to polish almina
ceramic capillary ferrules, ferrules with different outer diameter, ferrules that
require flat, angled PC, or another style of polishing.
NOTE
The polishing film and polishing fluid used on the OFL-12 are selected
especially for the processes performed on the OFL-12. If you use any other
polishing film or fluid, we cannot guarantee that the polishing specifications
will be met.