Seiko Group OFL-12 SERIES - Manual (Page 14)

2 - 3


Power switch
Switches the power ON/OFF.

ON button (green)
When this button is pressed, the polishing disk begins to rotate. When the time
limit expires as set by the timer, the polishing disk stops rotating.

OFF button (red)
When this button is pressed, the polishing disk stops rotating and the polishing
operation stops immediately.

POWER lamp
Lights when power is input.

Timer
Specifies polishing time. The remaining time is displayed during polishing
operation.

Counter
The number of polishing operations can be checked on this counter. The
counter increments each time the ON button is pressed. To reset the counter,
press the reset button underneath the counter.

Fuse holder (2 places)
Holds a 250 V, 1 A fuse.

Fiber holder
The fibers are hung on this pole during polishing. The height is adjustable
according to the length of the fiber by loosening the black clamping knob,
slidingthe pole to the appropriate height, then tightening the knob.
Protection cover
When the cover is open, the polishing machine does not work if the switch is
turned on.
Polishing disk
Has a rubber disk on top onto which the polishing film is placed. The softness
ofthe rubber means that the tip of the ferrule will have a convex surface
polishedonto it.