Seiko Group OFL-12 SERIES - Manual (Page 37)

4 - 14
(3) Fiber Scratch or Large
Scratch
(4) Polishing Fluid Remaining
Fiber scratch
Large scratch
Polishing fluid


Repolish, doing the grinding,
polishing, and finishing steps.


Scratch was made during the
adhesive removal step.


Make sure you correctly follow
the
procedure for adhesive removal
(10 seconds with only the weight
of the jig, 20 seconds with 1 to 2
kg hand pressure).


Clean the tip of the ferrule. If you
cannot remove the polishing fluid,
do the finishing step again.


Clean the ferrules carefully after
every polishing step.