Seiko Group OFL-12 SERIES - Manual (Page 30)

4 - 7
NOTE
Make sure that the weight arm
lever goes to the full up position.
If it does not, the correct
polishing pressure will not be
applied to the holding jig and
polishing will not be performed
correctly.
NOTE
Take care not to pinch your hand
with the weight when you attach
or detach the holding jig to or
from the machine.
Step 7 Close the protection covers.
Step 8 Set the timer to 1 min. 30 sec.
(standard).
Preparation for polishing is
complete.
Step 9 Press the ON button. The
polishing disk begins to rotate
and polishing begins.
NOTE
Press the OFF button if there is
any problem. The polishing disk
will stop rotating and polishing
will stop.