Speed Queen Drying Tumblers SCB50EG - Manual (Page 41)

39
M412616
50 Pound (22 kg) Tumblers
LOW PRESSURE STEAM DRYING TUMBLERS
GROUNDING INSTRUCTIONS
Drying tumbler must be grounded. In event of malfunction or breakdown, grounding will reduce risk of electric
shock by providing a path of least resistance for electric current. Drying tumbler must be connected to a
grounded metal, permanent wiring system; or an equipment grounding conductor must be run with circuit
conductors and connected to the PE Busbar.
ࡽ
WARNING
To reduce the risk of fire and electric shock, check with a qualified service technician
for proper grounding procedures. Improper connection of the equipment grounding
conductor can result in a risk of electric shock.
WARNING
ࡽ
To reduce the risk of fire and electric shock, if electrical supply is coming from a three
phase service, DO NOT connect a “Stinger Leg” to a single phase machine.
Figure 14
LOW PRESSURE STEAM DRYING TUMBLERS
240 V
1 Phase, 50 Hz.
Minimum Wire Size 14 AWG (2.081 mm²)
Circuit Breaker 15 AMP
Poles 2