Sony SAT-HD200 User Manual
Page 25
24
3-4. Connecting to Antennas - Round Dish (Satellite A)
Receiving Signals
1. Connect the “Antenna” to the “ANT IN” jack on the DIRECTV
®
High-Definition Receiver using a coaxial
RF cable.
2. Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF
cable.
3. Connect the “Jack 1” of the dish antenna to the “SATELLITE IN” jack on the DIRECTV HD Receiver using
a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satel-
lite dish antenna.)
4. Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.
Cable TV
wall jack
LNB
Sat A
Dish
Jack 1
Phone wall jack
Antenna
NOTE
While you are subscribing to a DIRECTV
®
pro-
gramming package, you can still view over-the-
air and cable TV programs, if you make con-
nections to the over-the-air and/or cable jacks.
NOTE
You may not be able to receive DIRECTV
®
High-
Definition programming with a round dish.
A triple LNB multi-satellite dish antenna with a
SAT C LNB is required, along with this
DIRECTV HD Receiver and high-definition tele-
vision equipment.