Sony SAT-HD200 - Manual (Page 35)

4. FRONT PANEL AND REMOTE CONTROL
34
4-1. Using the Front Panel of the DIRECTV ® High-Definition Receiver
Power
Turns the DIRECTV HD Receiver on or off.
Display Window
Shows DIRECTV HD Receiver status : Current output format, output type, and channel number.
Remote Control Sensor
Receives signals from the remote control.
Format
Sets the output resolution to one of 1080i, 720p, 480p, video 1/2, variable 1, variable 2, variable 3, and Auto DVI for-
mats. Choose the correct display format for your TV. (Refer to Section 2.3, ‘Display Formats’)
Display
Shows station and program information in the banner shown at the top of the screen. To remove the banner, press
the button again or wait for 10 seconds. You can select the display mode, short or detailed, by pressing “
DE ”. You
can also change the Audio language, when available, by pressing “ F G ”.
Menu
Shows the main menu on the screen. You can return to normal viewing by pressing the Exit button.
Guide
Shows the DIRECTV Advanced Program Guide

screen that shows you a program schedule containing a list of cur-
rent and future programs. You can also access the Advanced Program Guide

via the main menu (DIRECTV Guide).
You can return to normal viewing by pressing the Exit button.
Select
If the main menu is displayed, pressing the Select button will activate the selected MENU item. If the Select
button is pressed while you are in normal viewing, the information banner will be displayed.
Exit
Clears all on-screen displays and returns to normal viewing from any menu.
Arrow Key (CH +/-)
Allows you to navigate on-screen menus and to adjust the system settings and preferences. Use the arrow keys to
move to a menu option and then use the Select button to access it.
1
2
3
4
5
6
7
2 3
8
1
8
9
10
4 5 6 7
10
9
1080i 720p 480p 480i DVI RGB YP B P R
Display format indicator
Standby mode indicator Multi function indicator
Display interface indicator