Sony SAT-HD200 - Manual (Page 28)

27
3. SETUP AND CONNECTIONS
3-5. TV Connection - Analog TV
TV Viewing
1. Connect the “OUT TO TV” jack on the DIRECTV ® High-Definition Receiver to the “ANT IN” jack on your TV
using a coaxial RF cable.
2. Connect the “AUDIO OUT” and “VIDEO OUT” jacks on the DIRECTV HD Receiver to the “A/V IN” jack on your TV
using RCA-type cables.
(Note : These connections are only available when video 1/2(480i) display format is selected.)
Phone wall jack
L
Antenna
Analog TV
ANT.IN V R
Cable TV
wall jack
LNB
Sat B LNB
Sat C LNB
Sat A
Dish
5x4 Multi-switch
Output