Sony SAT-HD200 - Manual (Page 39)

38
4-3. Programming THE REMOTE CONTROL
The RM-Y815 remote control is a universal remote control that can be programmed to control
most TV, VCR, DVD and Amp models of the brands that appear on pages 39-40.
1. Find the code(s) for the brand of the device you want to operate with this remote
control.
You can find these codes on pages 39-40.
2. Press the CODE SET button.
The function indicator begins flashing.
3. Press the 0-9 buttons to input the brand code, then press the ENTER button.
The function indicator goes off, and the remote is set up to operate that device.
4. Test the remote control.
Press the POWER button for that equipment, then press other operation controls such as the
CH+/-buttons. If the device does not respond to the remote control, repeat from step 2 and
enter a different brand code in step 3.