Sony SAT-HD200 - Manual (Page 98)

97
PRODUCT SPECIFICATIONS
Television System NTSC, Analog American Standard (480i)
ATSC, Digital TV standard (1080i, 720p, 480p, 480i)
DIRECTV
Channel Coverage
Digital TV 1-69
VHF 2-13
UHF 14-69
CATV 1-125
DIRECTV variable
Inputs/Output
ATSC/NTSC RF Inputs Antenna (1), Cable TV (1) (ATSC 8-VSB over CATV or Terrestrial)
RF Output Out To TV (1) (selectable Channel 3 or 4)
DIRECTV RF Input Satellite In (1)
DVI-HDTV Output DVI-HDTV Out (1), DVI-D Single Link connector
1080i, 720p, 480p digital RGB
EIA-861 Compliant, HDCP Compliant
RGB Output 15-pin Connector (1)
1080i, 720p, 480p RGB
Component Video Output Component Out (1), Phono Jack connector
1080i, 720p, 480p YPbPr
S-Video Output S-Video Out (1), 4-pin Mini-DIN
480i Y/C
Video Output Video Out (2), Phono Jack connector
480i Composite NTSC
Digital Audio Optical (selectable Dolby Digital or PCM output)
Analog Audio Audio Out (2) (Fixed Output Level)
Access Card Smart Card (Slot on the back)
Authorized Service Port 9-pin Serial Port (1)
Supplied Accessories
Remote Control RM-Y815
Batteries AA type Batteries (2)
Cables DVI-D Single Link Cable (1)
Component Cable (1)
S-Video Cable (1)
Audio/Video Cable (1)
RF Cable (2)
Telephone Cable (1)
Dimension 430mm (W) x 69mm (H) x 329mm (D) (Excluding Foot)
Mass 3.84kg
Power Requirements AC 120V, 60Hz
Power Consumption 100W (Maximum)
35W (Standby)
Design and specifications are subject to change without notice.