Sony SAT-HD200 - Manual (Page 31)

30
3-5. TV Connection - HD Monitor (DVI-HDTV type)
TV Viewing
1. Connect the “OUT TO TV” jack on the DIRECTV ® High-Definition Receiver to the “ANT IN” jack on your TV
using a coaxial RF cable.
2. Connect the “DVI-HDTV OUT” jack on the DIRECTV HD Receiver to the “DVI-HDTV IN” jack of your TV using
DVI -type connector. (The “TYPE” switch must be set toward the “RGB/DVI-HDTV” jacks.)
3. Connect the L/R “AUDIO OUT” jacks on the DIRECTV HD Receiver to the L/R “AUDIO IN” jacks on your TV using
RCA-type cables.
(Note : The DVI-HDTV OUT jack is available when 480p, 720p, or 1080i display format is selected.)
Note: For best access to high-definition and programming from DIRECTV, connect the DVI-HDTV output to
a DVI-HDTV input on your high-definition TV or monitor. A DVI-HDTV input is one that is compliant with
EIA-861 and HDCP specifications. Check your TV or monitor's user manual to find out if the TV or moni-
tor's DVI input is compliant with these specifications.
Phone wall jack
HD-Ready TV
Cable TV
wall jack
Antenna
ANT.IN L R
LNB
Sat B LNB
Sat C LNB
Sat A
Dish
5x4 Multi-switch
Output