Sony SAT-HD200 - Manual (Page 85)

8-15. Setting the Digital TV Input
Digital TV Input
The DIRECTV ® High-Definition Receiver is also capable of receiving an 8-VSB signal, if any, via cable service. Before
you move the highlight in the sub menu, the dialogue box will pop up to make sure if you want to change the mode.
After changing it, you should run “Auto Program” to view a program sent via the designated input.
To set the Digital TV signal source:
1. Press the Menu button on the Remote Control to display the screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the Preference menu by pressing “ ”.
4. Scroll down to Digital TV Input using “ E ”.
5. Move the highlight to the right with “ G ”.
6. The pop-up dialogue box will appear when you move the highlight to change the mode.
7. Choose “OK “ if you want to change the mode, Otherwise, choose “Cancel”.
8. Press the Exit button on the remote control to return to TV viewing.
84