Smart Technologies 600i3 - Manual (Page 51)

39 | CHAPTER 5 – REMOTELY MANAGING YOUR SMART BOARD 600I3 OR
SBD600I3 INTERACTIVE WHITEBOARD SYSTEM
To allow the ECP to
sequence commands
1. Type on, and then press ENTER.
2. Type set input=vga1, and then press ENTER.
To control the sequence
programmatically
Start
Send command:
ON
Send command:
get powerstate
Is the response:
powerstate=on
NO
Send command:
set input vga1
YES
Wait for
response
Wait for
response
Wait for
response