Removing the projector from the boom – Smart Technologies 600i3 User Manual
Page 71
59 |
CHAPTER 8 – REPLACING YOUR UF55/UF55W PROJECTOR LAMP
Removing the Projector from the Boom
Before you can replace the projector lamp, you must remove the projector from
the boom.
NOTE
Ensure that you remove the projector’s plastic lens cover.
WARNING
Two people are required to remove and replace the projector.
To remove the projector
from the boom
1. Turn off the projector by pressing the remote control’s power
button.
2. Wait for the projector to cool by allowing the fan to shut down completely,
and then disconnect the power cord from the wall.
3. Disconnect all of the cables from the projector. For details on removing the cable
cover, see the UF55/UF55w Projector User’s Guide (
).
4. While firmly holding the projector with your hand, and without applying pressure
or weight to the projector boom, remove the screw holding the cover in place,
and then remove the cover. Place the screw in a safe place.