Smart Technologies 600i3 - Manual (Page 69)

Chapter 8
Replacing Your UF55/
UF55w Projector Lamp
This chapter has detailed instructions on how to replace your projector lamp.
Replacing the Projector Lamp ...................................................................... 57
Removing the Projector from the Boom ................................................. 59
Replacing the Projector Lamp Module ................................................... 61
Replacing the Projector .......................................................................... 63
Resetting the Lamp Timer ...................................................................... 64
Replacing the Projector Lamp
If a lamp fails, or if a replacement message appears on the UF55/UF55w projector’s
screen, a qualified person can replace the projector lamp. Don’t access the service
panel if you don’t have a replacement lamp and instructions.
WARNING
•
Refer to the safety warnings and precautions published in the
UF55/UF55w Projector User’s Guide (
document 133564 ).
• Do not attempt to service the projector other than performing routine lamp
replacement. Other than the lamp module, there are no user-serviceable parts
inside the unit.
• This projector detects its own remaining lamp life. Replace the lamp when the
lamp life warning message appears. If you continue to use the projector after
the replacement message appears, the lamp might shatter or burst, scattering
glass throughout the projector head.